A research reactor is a 10 by 8 grid. Coordinates are column, then row, from (1, 1) at the top left.
Inputs on the left: alpha (α) is (1, 1) to (4, 4), beta (β) is (1, 5) to (4, 8). Outputs on the right: psi (ψ) is (7, 1) to (10, 4), omega (ω) is (7, 5) to (10, 8). Columns 5 and 6 between them are the chamber. Some levels change this.
Two waldos, red and blue, run at the same time. Each follows only instructions of its own colour, starting from its START marker and heading the way it points.
A cell holds, per colour, one arrow and one other instruction. A waldo crossing it runs the instruction, then turns on the arrow.
To deliver: drop the molecule wholly inside an output zone, then pass an output instruction for that zone. Repeat until the quota is met.
Alt+A / Alt+B read the alpha / beta input, Alt+P / Alt+O the psi / omega output: what each takes or wants and how many you’ve delivered. Add Shift (Alt+Shift+A and so on) to open that molecule.
M in a zone opens its molecule as a small grid. For an input, each atom reads as the reactor cell it will appear on.
Shift+R / Shift+B: where the red / blue waldo is (its START when stopped).
Ctrl+R / Ctrl+B: the waldo’s whole path as a list, every instruction it will hit and where it loops or stops. Check it before every run. Enter jumps to a line’s cell.
[ / ] pick a category (Inputs, Outputs, Hardware, Waldos), , / . jump through its items.
Ctrl+arrows skip cells that read the same; Shift+Backspace gives a cell’s full details.
The game’s palette letters place an instruction at the cursor: W A S D arrows, E grab / drop, R input, F output, G rotate counter-clockwise, and so on.
New instructions take the active colour, red at first. L switches it.
’ / ; cycle the instruction’s main setting: input alpha / beta, output psi / omega, grab / drop / grab-drop, an arrow’s direction.
For any other setting, colour included: Alt+Up / Alt+Down choose the setting, Alt+Left / Alt+Right change it. In a cell with both an instruction and an arrow, Shift+Up / Shift+Down choose which one you’re editing. Backspace opens the game’s right-click menu if you prefer that.
Delete, Ctrl+X, Ctrl+C, Ctrl+V work on the active colour. Shift+Space on two corners marks a rectangle for them to work on. Ctrl+Z / Ctrl+Y undo and redo.
Later levels put several reactors on a pipeline map, a 32 by 22 grid. Its main stops:
Components: a table, one row per building, columns for its inputs and outputs (where each comes from or goes, and its molecule). Enter on a reactor opens it; Enter on an output jumps to its pipe’s end on the map.
Map: every cell. Enter on a pipe end starts drawing: arrows lay or take back pipe, Enter finishes.
Shelf: buildings to place. Enter arms one; Enter on the map places it at the cursor.
Ctrl+X then Ctrl+V on the map moves a building, Ctrl+C then Ctrl+V copies it, Backspace opens its menu.
To survey the map faster, zoom out: Shift+Up turns the cursor into a 4 by 4 block, then 8 by 8; Shift+Down zooms back in. The blocks are fixed: at 4 by 4 they are columns 1 to 4, 5 to 8 and so on, and rows likewise, so a block is always the same place. Arrows move a whole block.
Place that palette slot’s instruction at the cursor, in the active colour
L
Switch the active colour
Delete, Ctrl+X / Ctrl+C / Ctrl+V
Act on the active colour’s instructions only. Hardware moves only by cut and paste, and only from a cell where the active colour has nothing (lock a layer to reach hardware under instructions)
We now allow you to switch to a different reactor with ctrl+tab/ctrl+shift+tab, or directly to reactor with that number with ctrl+corresponding digit.
In production levels, closing the error overlay is now done with the ` key or by editing a reactor/pipeline as opposed to escape (latter still works on research levels). This should hopefully give greater visibility into things like pipe occupancy and allow you to actually view the pipeline mid-run.
We now tell you what molecule(s) are in your pipe(s) when scrolling over them as opposed to generic counts.
We now have configuration for what gets spoken per-event. It’s under options. … it might also be borderline psychotic and far too granular, we’ll see.
Removed instructions from categories; they had shortcut keys already.
Added ctrl+G to check progress, ctrl+q to check reactor quota, ctrl+s to check symbols, cycles and reactors, alt a/b for alpha and beta inputs, alt p/o for psi/omega outputs. Alt+shift a/b/p/o now open the molecule viewer for that input/output, ctrl+shift p/o edit the psi/omega output notes.
Drawing pipes no longer locks you to the grid.
Added pipeline shelf as a category to place buildings while remaining on a grid.
Added zoom to the pipeline map: shift up/down zoom out and in through 4x4 and 8x8 blocks, ctrl+shift up/down jump straight to 8x8 or back to 1x1. Blocks tell you what’s in them, shift+backspace for the details.
p on a pipe now tells you where it goes, and how many molecules are in it during a run.
Added alt+1 to jump to the grid/map, alt+ to the pipeline table, alt+2 to the palette/shelf, alt+3 to the tools, alt+4 to the run log, alt+5 to the layers or the enemy. Alt+1 from a table row and alt+ from a building on the map take you to that building. Alt+backspace takes you back to where you were before the jump.
Getting an error now immediately opens the crashed reactor’s state. Editing said state or hitting escape closes the dialogue.
Rectangle selection now works by having you place corners with shift+space, Ctrl+space clears the rectangle.
Shift left/right cycle through the instruction colors on the given cell. Shift up/down cycle over the instructions of that color. Alt up/down cycle through instruction parameters, e.g., colors, output type. Alt left/right change parameter values.
We have a draft of the manual now guiding you through the first two tutorials.